Perfect Working Accuracy Shutter Roll Forming Machine With 36 Rollers European Style
 
Technical parameter 

 
Components of Roll Shutter Door Forming Machine
 
The roll forming machine consists of manual uncoiler, infeed guide, fixed position driven forming stations,
rectifying device, cutting equipment, hydraulic station, control console, and manual unload product run out table.
 

 
 
Material of Main Equipment  
 

 
Process sketch
 
Uncoiling the sheet --- Infeed guiding --- Roll forming --- Rectifying the straightness --- 
--- Measure length --- Cutting the panel --- panels to the supporter (option: automatic stacker)
                      
Components and Function
 
Coil Feeding Equipment        Consists of one uncoiler with capacity of 3000kgs and its base. The mandrel can expand or shrink. With separate button to make the mandrel roll.
 
Guiding Equipment               Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.
 
 Roll forming system             The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers with quenched treatment after being machined by the exact machining tool.
 
 Hydraulic Station                  Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.
 
 PLC Control Panel                 Main parts imported from Mitsubishi. The operation is easy and steady and can be choose operation by manual or automatically.
 
Introduction of  cold Roll Forming Machine
 
Roofing tile forming machine including: feeding, guiding, roll forming,cutting, hydraulic station, control station and run out tableCold Roll forming machinery consists of uncoiler and its base, coil sheet
guiding equipment, film covered device, roll forming system, post-cutting equipment,
hydraulic station, controlling system, supporter table.
The machine is full-automatically controlled by PLC, the whole hydraulic transmission, drive hydraulic oil jar carry out and shear through center pump station towards the hole, hydraulic pressure Motortransmit power as main transmission. it' s reliable to operate steadily by hydraulic pressure, shear towards hole precision geometry form rule of the notch. Its hydraulic pressure transmission,to set correct and fit.
The cold roll forming machine can produce many types of Roof tiles, wall panels, frame profiles.The whole line mainly consists of uncoiler and its base, coil sheet flattening equipment, punching equipment , pre-cutting equipment, C-shape forming system, hydraulic station, and PLC controlling system